E00/E01 piezo controllers are used to drive and control piezoelectric ceramics and nanopositioning platforms and mainly grouped into modular, integrated, industrial and board controllers with analog, digital, keyboard, I/O and other control methods. Available in open loop, closed loop, single or multiple channels. They can drive all kinds of piezoelectric products.
Characteristics
Modules
• Power amplifier module
• Sensor Control Module
• Display & Interface Module
• Chassis & Power Supply Module
Output Voltage
-20~120V, -20 ~150V, 0~300V, 0~600V, 0~900V, 0~1800V, ±120V, ±150V, ±300V, ±450V, ±900V···
Modular Combination Controller
Power Amplifier Module,Sensor Control Module,Display & Interface Module,Chassis & Power Supply Module.
Modules are freely combined into four types of A, B, C, D.
Type A:Power amplifier module Chassis & power supply module.
Type B:Power amplifier module Sensor control module Chassis & power supply module.
Type C:Power amplifier module Display & interface module Chassis & power supply module.
Type D: Power amplifier module Sensor control module Display & interface module Chassis & power supply module.
Technical Data Range
Type: E00/E01
Amplifier Module
Extended amplifier only: 1~18 channels/1~9 channels
Control analog input: Unipolar 0~+10V or 0~+5V, Bipolar -10~+10V or -5~+5V
Optional output voltage: 100V/150V/200V/300V/±150V,±200V/±300V/600V,900V/1800V/±900V
Voltage stability: < 0.1%F.S. (full scale) /8 hours
Input impedance: 100KΩ±20%
Unloaded bandwidth: Optional 1K, 10K, 30K, 50KHz
Channels/module: 1~3 channels
Ave. Power 1 channel: 7W~35W
Peak Power 1 channel: 20W~110W
Ave. Current: 40mA~350mA
Peak current: 100mA~11A
Bandwidth, small signal: 5kHz~200kHz
Bandwidth, large signal: 1kHz~50kHz
Voltage gain: 10~180 times
Knob adjustment: 10 turns
Sensor Module
Sensor type: SGS, LVDT, CAP
Sensor channels: 1~3 channels
Sensor: LEMO connector (sensor input)
Sensor output: BNC connector for 1 channel, LEMO connector for 3 channels
Sensor output voltage:Unipolar: 0~+10V, Bipolar: -10~+10V
Display/Interface Module
Channels: 1~3 channels
D/A converter: 16/24 bit ±10V output
A/D converter: 16 bit ±10V input
Output voltage resolution: 16 bit(1/30000), 24 bit(1/100000)
Communication: RS-232/RS-422/USB 2.0
Baud rate: 9600, 19200, 38400, 57600, 76800, 115200, 128000, 230400, 256000
Chassis/Power Supply Module
Power supply: AC 220V±10% 50Hz±10%
Current limit: Short circuit protection
L×H×D: 500×175×375mm/280×175×375mm
Functions
Combination: Available amplifier, sensor and interface modules, see the instructions
Feature: Modules combined freely, upgradeableBasic control way: Manual adjustment, analog input, computer serial/USB interface, spontaneous waveform control, openloop/servo control
Basic Functions: Overcurrent protection, overtemperature protection, dynamic power protection
Software configuration: Powerful standard computer control software
Spontaneous waveform: Sine, square, triangular, sawtooth wave, 1kHz-10kHz frequency with no attenuation.
LCD keyboard: Standard(LCD, membrane button, RS-232, RS-422, USB)
